2024 John Deere Engine & Drivetrains Marine Engines 4045TFM85

Information

2024 John Deere Engine & Drivetrains Marine Engines 4045TFM85

Marine Propulsion Engine

Features may include:

High torque and low rated RPM
  • High torque provides excellent vessel control and maneuverability. Lower rated propulsion RPM reduces vibration and noise for improved crew comfort.
High-pressure common-rail (HPCR)
  • The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures. It also controls fuel injection timing and provides precise control for the start, duration, and end of injection. Electronic transfer pump is self-priming for ease of maintenance. Provides high performance, excellent fuel economy, and low emissions.
Water-cooled exhaust manifold
  • Integrated components eliminate external hoses and fittings. Wet exhaust manifold creates a cooler and quieter environment for passengers and crew.
Replaceable cylinder liners
  • Replaceable wet-type cylinder liners are precision-machined and hardened for long life. Allows engine to be rebuilt to original specifications.
Electronic engine control unit (ECU)
  • Advanced fault code diagnostics and customizable engine protections ensure reliability and uptime. Provides highly customizable features and trim to integrate your vessel.

Photos

Highlights

  • Phoenix, Arizona
  • 2024
  • John Deere Engine & Drivetrains
  • Marine Engines 4045TFM85
  • 1118 lb (507 kg)
  • Available
  • 31.8 in (808 mm)
  • 35.9 in (912 mm) | crankshaft centerline to top: 24.6 in (625 mm) | crankshaft centerline to bottom: 11.3 in (287 mm)

Specifications

  • 2024
  • John Deere Engine & Drivetrains
  • Marine Engines
  • 4045TFM85
  • General
  • 4
  • 275 cu in (4.5 L)
  • 4.17 in (106 mm)
  • 5.00 in (127 mm)
  • In-line, 4- Cycle
  • Turbocharged
  • M1: 50 KW (67 bhp) | M2: 93 KW (125 bhp) | M1 - Typical full-power operation (hr): Uninterrupted | M2 - Typical full-power operation (hr): 16 of each 24 hr
  • M1: 2400 rpm | M2: 2500 rpm
  • M1 - Typical annual usage (hr): Unrestricted | M1 - Typical load factor: >65% | M2 - Typical annual usage (hr): 000-5 | M2 - Typical load factor: <=65%
  • M1: 5.7 gal/hr (21.5 L/hr) | M2: 7.7 gal/hr (29.1 L/hr)
  • 40.2 in (1020 mm) | to rear face of flywheel housing: 34.5 in (877 mm)
  • 31.8 in (808 mm)
  • 35.9 in (912 mm) | crankshaft centerline to top: 24.6 in (625 mm) | crankshaft centerline to bottom: 11.3 in (287 mm)
  • 1118 lb (507 kg)
  • Flywheel housing SAE: 3