2024 John Deere Engine & Drivetrains Marine Engines 6090AFM85

Information

2024 John Deere Engine & Drivetrains Marine Engines 6090AFM85

Marine Propulsion Engine

Features may include:

High torque and low rated RPM
  • High torque provides excellent vessel control and maneuverability. Lower rated propulsion RPM reduces vibration and noise for improved crew comfort.
4-valve cylinder head
  • Excellent airflow through 4-valve cylinder head delivers greater low-speed torque and better transient response time.
High-pressure common-rail (HPCR)
  • The HPCR fuel system provides variable common-rail pressure, multiple injections, and controls fuel injection timing and provides precise control for the start, duration, and end of injection.
Water-cooled exhaust manifold
  • Integrated components eliminate external hoses and fittings. Wet exhaust manifold creates a cooler and quieter environment for passengers and crew.
Replaceable cylinder liners
  • Replaceable wet-type cylinder liners are precision-machined and hardened for long life. Allows engine to be rebuilt to original specifications.

Photos

Highlights

  • Phoenix, Arizona
  • 2024
  • John Deere Engine & Drivetrains
  • Marine Engines 6090AFM85
  • Model: 6090AFM85
  • 2326 lb (1055 kg)
  • Available
  • 40.4 in (1027 mm)
  • 38.7 in (984 mm) | crankshaft centerline to top: 26.2 in (665 mm) | crankshaft centerline to bottom: 12.6 in (319 mm)

Specifications

  • 2024
  • John Deere Engine & Drivetrains
  • Marine Engines
  • 6090AFM85
  • General
  • Model: 6090AFM85
  • 6
  • 549 cu in (9.0 L)
  • 4.65 in (118 mm)
  • 5.35 in (136 mm)
  • Turbocharged and air-to-coolant aftercooled
  • In-line, 4- Cycle
  • M1: 64.6 KW (17.1 bhp) | M2: 243 KW (326 bhp) | M3: 280 KW (375 bhp) | M4: 317 KW (425 bhp) | M1 - Typical full-power operation (hr): Uninterrupted | M2 - Typical full-power operation (hr): 16 of each 24 hr | M3 - Typical full-power operation (hr): 4 of each 16 hr | M4 - Typical full-power operation (hr): 1 of each 12 hr
  • M1: 2100 rpm | M2: 2200 rpm | M3: 2300 rpm | M4: 2400 rpm
  • M1 - Typical annual usage (hr): Unrestricted | M1 - Typical load factor: >65% | M2 - Typical annual usage (hr): 000-5 | M2 - Typical load factor: <=65% | M3 - Typical annual usage (hr): 000-4 | M3 - Typical load factor: <=50% | M4 - Typical annual usage (hr): 000-3 | M4 - Typical load factor: <=40%
  • M1: 286 gal/hr (213 L/hr) | M2: 18.9 gal/hr (71.4 L/hr) | M3: 21.4 gal/hr (80.9 L/hr) | M4: 24.1 gal/hr (91.2 L/hr)
  • 67.4 in (1712 mm) | to rear face of flywheel housing: 55.7 in (1415 mm)
  • 40.4 in (1027 mm)
  • 38.7 in (984 mm) | crankshaft centerline to top: 26.2 in (665 mm) | crankshaft centerline to bottom: 12.6 in (319 mm)
  • 2326 lb (1055 kg)
  • Flywheel housing SAE: 2